World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
COVERS T0Y0TA P/U , TUNDRA, FORERUNNER, LAND CRUISER
SCROLL DOWN THE PAGE TO FIND THESE SUBJECTS
|
Toyota High Angle & Long Spine Shafts |
|
THESE ARE COMPLETE WITH FLANGES AND PRECISION BALANCED OUR FLANGES FIT YOURS NO ADAPTORS. CLICK HERE FOR CUSTOM HIGHER ANGLE CVs
|
Spicer
type 40 degree
No CV
41 degree maximum
ALL Toyota Stock
|
FRONT TOYOTA Pick-up
or 4RunnerHEAVY DUTY STOCK -- OUR FLANGES FIT YOURS
Toyota pickup front with high angle CV 40 degrees, 41 degrees at the pinion and no long splines -- $275.00 Provide the TC flange to Pinion flange measurment. __________________________________________________________________________
Toyota pickup front with high angle 40 degrees AND long spline -- $350.00 Provide the TC flange to Pinion flange measurment. __________________________________________________________________________ FRONT TOYOTA Pick-up / 4RunnerNO CV WITH LONG TRAVELFor angles 41 degrees max. Note this will vibrate considerably for angles greater than 10 degrees at 30 mph and up. For rocks mainly. we have 250 wall tubing. Very tough, you won't have to buy another ever. Toyota front long spline and no CV-- $275.00 Provide the TC flange to Pinion flange measurement. |
|||||
| TOYOTA REAR PICK-UP, TUNDRA, TACOMA, 4RUNNER | |||||
|
Rear Toyota Pick-up/Tundra / 4Runner One-Piece to Replace Two-Piece
REMOVE VIBRATIONS- Provide the TC flange to Pinion flange measurment. Toyota Pickup or Forerunner Rear One-Piece to Replace One or Two-Piece withstandard CV -- $260.00 Toyota Pickup or Forerunner Rear One-Piece to Replace One or Two-Piece with high angle 40 deg CV -- $295.00 Toyota Tundra or Tacoma Rear One-Piece to Replace Two-Piece with standard CV -- $295.00 Toyota Tundra or Tacoma Rear One-Piece to Replace Two-Piece with high angle 40 degr CV-- $345.00
diff $375 stock angle CV $425 high angle 40 degree CV
FRONT OR REAR TOYOTA FOR ANY LIFTS HIGHER THAN 6" for any competition.
For lifts 7"and up our flanges fit yours no adapters Toyota pickup
front or rear with BAD BOY JR CV 60 degrees 2ton Standard spline
--$495.00
__________________________________________________________________________ Toyota pickup front or rear with BAD BOY JR CV 60 degrees 2ton with long spline -
- $570.00
__________________________________________________________________________ Toyota pickup front or rear with PERFormance CV 45 daily driver degrees 2ton Standard spline $595.00 our flanges fit yours!! JUST LIKE THE ONE BELOW EXCEPT NO LONG SPLINES __________________________________________________________________________ Toyota pickup
front or rear with PERFormance CV 45 daily driver degrees 2ton
with long spline -- $625.00
FRONT TOYOTA LAND CRUISER OUR FLANGES FIT YOURS. Look at the tube we use for no twisting. For Stock Suspensions where there is interference
1310 U-JOINTS $245 1350 U-JOINTS $325
HIGH ANGLE CV FOR HIGHER LIFTS , WITH INTERFERENCE
HALF TON 1310 HIGH ANGLE CV WITH REGULAR SPLINE $275 HALF TON 1310 HIGH ANGLE CV WITH LONG SPLINE $350 ONE TON 1350 HIGH ANGLE CV WITH LONG SPLINE $395 ________________________-__________________________________________________________________________ Suspensions where there's no interference half ton and one ton drive shafts
-- $245 HALF TON 1310 WITH 2.5" 120 wall tube -- $350 ONE TON 1350 2.5" 120 wall tube
For spring over and higher suspensions 3 inch 120 wall tube DOM OUR FLANGE FIT YOURS, 60.8x60mm hole pattern will be installed at the slip yoke. |
Note the cut outs for high angle. Depending on year/model
flanges come installed on the drive shaft to fit your differential
