World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
Drive Shaft Sub-Assemblies
Toyota CVs
are available with standard or high angle CV. The CV is machined to provide up to 35 degrees.
Toyota Standard complete CV -- $225.00 Toyota High Angle complete CV -- $265.00
GM Saginaw CV with butt to fit 2-inch 120 wall tube
Saginaw high angle CV for 2 inch 120 wall tube -- $185.00 Saginaw high angle CV for 2-3/4 inch 65 wall tubing or you
can turn it down to thicker tubing -- $205.00
Saginaw high angle CV for 2-inch 120 wall tube -- $225.00 Saginaw high angle CV for 2-and-three-quarter inch 65 wall tubing or you can turn it down to thicker tubing -- $235.00
Spicer Type 1310 half-ton Standard Angle CV
All 1310 CVs fit all 1310 CV style output yokes
Spicer Type 1310 half-ton Standard Angle CV -- $165.00
Spicer Type Hybrid High Angle 40 Degrees CV
Spicer type hybrid high angle 40-degree CV - $195.00
Spicer type 1330 three-quarter ton CV
Binds between 26-30 degrees. 3 5/8” wide U-joints. 2.5”Tube 83 wall thickness. U-joints are 3 5/8 inches wide and 1 1/16 diameter caps.
Spicer type 1330 three-quarter ton standard CV -- $175.00
Spicer type 1350 One-Ton Standard CV
All the rubber to retain the grease is still on the unit. And fits 3" or 3.5" tubing 83 wall with pilots of 2.688 inches or 2 inches. U-joints are 3-5/8" wide adn 1-3/16 inch diameter caps. This CV binds between 26 and 30 degrees.! Note: If you don’t have a flange now you will need one for this CV.
We can send the flange with the CV if we know the transfer case or Differential. If it doesn’t exist, we can make it. Please let us know on the online order form:
The transfer case you have
If you need a 2" inch pilot or a 2.688-inch pilot
And if you need a flange to the transfer case output
1350-with-flange
1350no-flange
Spicer type 1350 standard CV Head only-- $195.00
________________________________________________________________________________
CV STYLE YOKE 1350 AND FLANGE
1350 CV style yoke for any fixed ouput 32 spline. Also made custom for any other spline other than 32.
Custom flange for any splined fixed output
Transfer case Output YOKE for 1350 CV -- $95 FACTORY MADE For 32 spline output 205/203, Atlas, all 32 splined fixed output Transfer cases.
Transfer case Output YOKE for 1350 CV -- $165 CUSTOM MADE for TCs D300, D20, any fixed none 32 spline. Specify which one of the TC when asked during checkout.
Transfer case Output flange for 1350 -- $165 with number of spline specified
The Bad Boy Junior Competition CV (Non Daily Driver)
has the center at 5.5” diameter. The center is 5” from the back of the flange. The back of the flange to the first weld is 10”
This is the toughest competition CV in the industry and our customers have proven it in the last 5 years that we have manufactured these drive shafts. You get a completed and assembled CV with a flange of you choice machined to one of the yokes. It will press into 2 ¾ “ tube.
Bad Boy Junior CV Head only -- $325.00
The Bad Boy 80 degree maximum
Competition (non daily driver) CV
The flange machined to the CV is of your choice. If you have a flange already, like for a full size Ford or Saginaw style on a GM front, let us know and that is what we put on. Otherwise, if you don’t have a flange we provide one knowing what transfer case you have and whether it is the front or the rear shaft.
Bad Boy Shimmed Out
Bad Boy 80 CV -- $450
____________________________________________________________________________________________
DAILY DRIVER 1 1/2 TON CV
The "PERF"ORMANCE CV 1 1/2 ton CV with the the flange you need fits 3" 120 wall can be driven as a daily driver up to 35 degrees operating 45 degrees maximum. Proven on highly lifted Excursions and Superduty Trucks
