Chevy and GMC 1976 and below FRONT,
'76 AND BELOW REAR
with no CV one u-joint on each end with a slip in the middle. U-joints
are half ton 1310. $185
Chevy and GMC 1977 and UP REAR,
'77 AND UP Stock REAR
Drive Shaft with no CV
one u-joint on each end with 32 spline slip yoke. Chevy and GMC are the
same with Chevy u-joints. u-joint
measures 3 5/8 end cap to end cap and the diameter of the cap is 1 1/8.
With one clip on each bearing for inside yoke u-joint retention.
You get the
complete and precision balanced stock drive shaft.
Please note that is the vehicle is lifted you will need a CV style drive
shaft. The drive shaft is called a SLIP
WITH CV DRIVE SHAFT.
S10 Late Model 1995 and up Two-Piece REAR Drive Shaft
with Two Saginaw CVs on the Rear Piece
Front stock drive shafts are available. $225. Please
call us for this one.
All other years for S10 please call us we make them all
and very competitive on price too.
You get a complete
drive shaft as shown in the picture or a drive shaft without the CV
knuckes on the second piece We recommend without the knuckles because we
have found that the CVs vibrate after the vehicle sags. We
guarantee that the drive will not vibrate.
|S10 Late Model
Two-Piece Drive Shaft with Two Saginaw CVs.
Complete Like the Picture above -- $395.00
Like the Picture above except
no CV knuckles --$275
|STOCK CHEVY HD
FRONT AND REAR DRIVE SHAFT '99 AND UP
MALE SLIP YOKE 32 SPLINE
Please call us on these drive
shafts to order over the phone. Cost $170.
32 SPLINE FEMALE YOKE AND DRIVE SHAFT
These drive shaft are very common. Call
us to order over the phone. Cost for Steel Drive Shaft $195.
Remember if you are suspension lifted,
you need a custom drive shaft not a stock one.
STOCK Aluminum Drive Shafts
to Center of u-joint on you tube and let us know what is is and we will
build you one.
We will make you one that size
out of ALUMINUM tube. All of our drive shaft come complete with
u-joints and precision balanced.
Note that we can also do
it in steel for $200. However we recommend aluminum for high performance
and longer u-joint life due to the lighter weight.
Information you need to specify on your
online order form:
|Complete ALUMINUM Shaft no
Complete Steel Shaft no
core required $200